当前位置:首页 > 政务公开 > 涉外法律
美方发布301征税340亿美元第四批产品排除目录
来源:泉州市商务局 [2019-05-20 11:00] 阅读人次:88 【字体:

  2019514日,美国贸易代表办公室做出决定,批准515项针对美国对华301征税340亿清单的产品排除申请。此次排除涉及2110位美国税号,其中510位税号下的产品完全被排除,1610位税号下的35项特定产品被排除。涉及过滤器、潜水机械、电动空气净化设备、除尘设备、输送机、液压电磁控制阀、直流电动机、按钮开关、立体显微镜、LED光治疗设备等产品。 

  经查询海关系统,本次排除涉及我市飞轮及滑轮、开关等2类产品,2018年相关税则号产品出口美国204.56万元。 

 

美国税号

具体排除产品
(原版英文)

具体排除产品
(非官方翻译,仅供参考)

8407.21.0040

 

全部排除

8427.10.4000

8473.40.1000

8481.10.0090

8483.50.9040

8421.21.0000

Apparatus, including pitchers, bottles, and units designed for incorporation into refrigerators, appliances or sink faucets, the foregoing fitted with filters for filtering or purifying water

装置,包括水罐、瓶子和设计用于冰箱、器具或水槽水龙头的装置,上述装置配有过滤或净化水的过滤器

Filtering apparatus, fitted with pumps, designed for use in pools, spas or similar contained bodies of water

过滤装置,装有泵,设计用于水池、水疗或类似的含水体

Filtering or purifying machinery or apparatus of a kind used for waste water treatment

用于废水处理的过滤或净化机械或装置

Submersible machinery for filtering water, designed for use in pools, basins, aquariums, spas or similar contained bodies of water

设计用于水池、水池、水族馆、水疗或类似含水体的过滤水的潜水机械

Water distillation machinery and apparatus not covered by heading 8419

8419品目未包括的水蒸馏机械和设备

8421.39.8015

Air purification equipment, electrically powered, weighing less than 36 kg

电动空气净化设备,重量36公斤以下

Dust collection equipment for cement, minerals and mining industries

水泥、矿产和采矿业用除尘设备

8428.39.0000

Apron-type chain conveyor

板式链式输送机

Roller conveyors

滚筒式输送机

Vibrating conveyors

振动输送机

8438.80.0000

Machinery for mixing beverages in single servings for direct human consumption, designed for use in commercial food service establishments

为商业食品服务机构设计的将饮料混合成单一份供人直接饮用的机器

Machinery for reconstituting single serving beverages for direct human consumption from frozen pre-packaged portions, designed for use in commercial food service establishments

设计用于商业食品服务机构的冷冻预包装部分直接供人食用的单一服务饮料再造机械

8481.90.9040

Armatures designed for use in hydraulic solenoid valves

液压电磁阀用电枢

C-poles, of steel, designed for use in hydraulic solenoid control valves

C极钢制,设计用于液压电磁控制阀

Housings designed for hydraulic ball valves, of cast iron or steel, each measuring 5.7 cm by 3.2 cm and weighing 0.528 kg

设计用于液压球阀的外壳,铸铁或钢制,每个尺寸为5.7 cm×3.2 cm,重量为0.528 kg

Metering spools, of aluminum, designed for use in hydraulic solenoid control valves

铝制计量线轴,设计用于液压电磁控制阀

Metering spools, of steel, designed for use in hydraulic solenoid control valves

液压电磁控制阀用钢制计量线轴

Poles, of steel, designed for use in hydraulic solenoid control valves

设计用于液压电磁控制阀的钢制电杆

Push pins, of steel, designed for use in hydraulic solenoid control valves

液压电磁控制阀用钢制推杆

Retainers, of steel, designed for use in hydraulic solenoid control valves

液压电磁控制阀用钢制夹持器

8501.10.4060

DC electric motors, of an output of less than 18.65 W, valued over $4, other than brushless

直流电动机,输出功率小于18.65W,价值超过4美元,无刷者除外

8501.52.8040

AC electric motors, multi-phase, of an output exceeding 14.92 kW but not exceeding 75 kW, other than for use in civil aircraft

输出功率超过14.92千瓦但不超过75千瓦的多相交流电动机,民用航空器除外

8505.90.7501

Coils, coil assemblies and other parts of electromagnets

电磁铁线圈、线圈组件和其他零件

8526.92.5000

Radio remote control apparatus for garage doors

车库门无线电遥控装置

Radio remote control apparatus for pet collars and pet food dispensers

用于宠物项圈和宠物食品分配器的无线电遥控装置

Remote control devices, hand held and battery powered, designed for use with toy model vehicles and aircraft

手提式和电池驱动的遥控装置,设计用于玩具模型车辆和飞机

8529.90.8100

Bezels, covers and housings, the foregoing designed for motor vehicle cameras

嵌框、盖和外壳,上述设计用于机动车摄像头

8536.49.0075

Electromechanical relays, for a voltage exceeding 60 V but not over 250 V, with contacts rated at 10 A or more

机电式继电器,电压超过60伏但不超过250伏,触点额定值为10安或以上

8536.50.9035

Push-button switches, rated at over 5 A, measuring no more than 2.9 cm by 2.9 cm by 2.9 cm, with 4 spade or brass terminals, with an actuator shaft with D-shaped cross section

按钮开关,额定电流大于5 A,测量值不超过2.9 cm x 2.9 cm x 2.9 cm,带4个铲形或黄铜端子,带一个D形截面的执行机构轴

Push-button switches, rated at over 5 A, measuring no more than 4.8 cm by 2.8 cm by 2.8 cm, with 2 spade or brass terminals

按钮开关,额定电流大于5 A,测量值不超过4.8 cm x 2.8 cm x 2.8 cm,带2个铁锹或黄铜端子

Push-button switches, rated at over 5 A, measuring no more than 5 cm by 1.7 cm by 1.9 cm, with 2 spade or brass terminals, with an actuator shaft with D-shaped cross section

按钮开关,额定电流大于5 A,测量值不超过5 cm×1.7 cm×1.9 cm,带2个铲形或黄铜端子,带一个D形截面的执行机构轴

8536.50.9040

Snap-action switches, each designed for installation in a wall-mounted enclosure or electrical box

速动开关,每个设计用于安装在壁挂式外壳或电气箱中

9011.10.8000

Stereoscopic microscopes, not provided with a means for photographing the image, valued not over $500 per unit

立体显微镜,未提供照相手段,每单位价值不超过500美元

9011.90.0000

Adapter rings, tubes and extension sleeves, stands and arm assemblies, stages and gliding tables, eyeguards and focusing racks, all the foregoing designed for use with compound optical microscopes

适配器环、管子和延伸套管、支架和臂组件、舞台和滑动台、护目镜和聚焦架,上述所有设计均用于复合光学显微镜

9018.20.0040

Ultraviolet or infrared LED light therapy devices for the professional treatment of pain or of ailments of the skin

用于专业治疗皮肤疼痛或疾病的紫外线或红外线LED光治疗设备